XS Scuba Thermo Isolation Manifold PRO
XS Scuba Thermo Isolation Manifold DIN
XS Scuba Thermo Isolation Manifold 7/8
XS Scuba Thermo Isolation Manifold PRO
XS Scuba Thermo Isolation Manifold DIN
XS Scuba Thermo Isolation Manifold 7/8

XS Scuba Thermo Isolation Manifold

XS Scuba
¥44,200 JPY

The Thermo by XS Scuba's Valves are designed and manufactured for long life and heavy use. Manifolds are made of marine grade brass with triple bright chrome plating for long life protection in salt water. Precision machined from high tension brass and chrome plated the valve stems will give years of service and corrosion free operation. Easy grip soft rubber hand wheel ensures long life and large ribs make turning handle easy even when wearing gloves.

Thermo Manifold-PRO Features: 

  • PRO - DIN/Yoke with removable spin-out insert
  • Center-to-center distance: 215 mm (8.46”) +/- 5 mm (0.2”)
  • 3/4”-14 NPSM standard inlet threads
  • High gas flow for optimum regulator performance
  • On/Off seat built from high strength brass with nylon seat and Teflon® plated for years of smooth operation
  • One-piece safety assembly protected within the body of the valve
  • Traditional copper crush washer sealed bonnet
  • Modular access plugs (R/L) included for use as single valves
  • Screw-in dip tube with hex tighten feature
  • Meets the requirements of CGA V9-2009 standards

Thermo Manifold-DIN Features: 

  •  DIN - Dedicated 300 bar
  • Center-to-center distance: 215 mm (8.46”) +/- 5 mm (0.2”)
  • 3/4”-14 NPSM standard inlet threads
  • High gas flow for optimum regulator performance
  • On/Off seat built from high strength brass with nylon seat and Teflon® plated for years of smooth operation
  • One-piece safety assembly protected within the body of the valve
  • Traditional copper crush washer sealed bonnet
  • Modular access plugs (R/L) included for use as single valves
  • Screw-in dip tube with hex tighten feature
  • Meets the requirements of CGA V9-2009 standards

Thermo Manifold-7/8" Features: 

  • Center-to-center distance: 210.5 mm (8.46 in.) min. to 220 mm (8.66 in.) max. / 215 mm (8.46 in.) matches the Highland bands
  • High gas flow for optimum regulator performance
  • On/Off seat built from high strength brass with nylon seat and Teflon® plated for years of smooth operation
  • One-piece safety assembly protected within the body of the valve
  • Traditional copper crush washer sealed bonnet
  • Modular access plugs (R/L) included for use as single valves
  • Screw-in dip tube with hex tighten feature
  • Tactile grip black rubber handwheel
  • Meets the requirements of CGA V9-2009 standards

 

Manifold Assembly Instructions
Assembling Twin Cylinders